Description
Product Properties
The CNC Panel Working Machinery specialized for machining aluminium composite panels.
Also called in the market as ACP panels or ACM panels.
The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vaccum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system.
All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller.
The machine can process light alloy materials such as: aluminium composite panels, HPL, aluminium panels up to 20 mm of wall thickness, bakelite, copper, acrylic, plexi-glass and etc.
The machine has a very technologic vacuuming table made from plastic.
The user does not need to isolate the table with gaskets like in the old system.
The vacuuming is isolated inside the vacuuming system under the table and has a very high clamping force.
This is a very new technology only used by ino Machinery.
The vacuuming table is divided into chambers of smaller vacuuming zones.
Each zone is controlled by a 24V pneumatic valve to open and close.
Those valves are controlled by the CNC controller, opened and closed according to the size of the panel.
In ino XT series, the machine decides itself which zone to open and which zone to close, free from the operator control, so that the panel is clamped perfectly on the table and will not move during the processing.
Thanks to the twin-spindle working mentality, there are 2 pieces of spindle motors each 5,5 kW 18.000 rpm, driven by one frequency inverter to adjust the routing speed.
Spindles are working one by one, where the first spindle is grooving and then the second is cutting the panel by working respectively.
This machining mentality causes much less time for tool changing and increases the output. This model is widely used in aluminium composite panel machining.
The reference pins are also moving up and down according to the work-flow completely controlled by the CNC controller and free from the operators’ control.
In the double station models it is used 8 pins and in the single station models 4 pieces are used.
The dust extractor is mounted on the spindle motor, collecting nearly 100% of the dust caused by the panel and keeps the machine clean.
The surface of the panel is prevented from the scratches that may be caused by the dust dropping on the panel.
Spindles
The two spindles each 5.5 kW and 18.000 rpm with ER-32 tool holders and available with manual tool changer.
Details: https://inomachinery.com/product/ino-xt-1640-cnc-panel-machining-center/
